| fastening, the cut edge thread easy loose, causing the belt fasteners to tear and break after a short period of working, and the belts unusable. Therefore, properly treating the cut edges is essential. You can use glue to secure the cut ends, but we have a simpler and efficient method. Here are the solution and steps for making a ready woven ironing belts: |
|
 |
| The first step, pre-mark the dimensions you need for cutting on an open area, can mark the size on the ground so futher no need to measure each belts for making many belts ready, that is saving time and making the process easier. We also offer Large scissors or a cutter for cutting the belts. |
|
 |
The second step, it’s an important step as above mentioned, seal the cut end at before fastening the belt with hooks. We made it seal with a heat melt tool, The principle is that after the heat melt tool is preheated, it melts the loose fibers and after cooling, the cut end will be very secure. Here is a video of operation link on YouTube:
https://www.youtube.com/shorts/8i_kqhWLKDA |
|
 |
