After finished the high-speed ironing line, do you know why there are oil stains in the middle of bed sheets and duvet covers? At the beginning you will confused that here are no lubrication points in the transmission parts of an ironing machine, so how could oil stains drip and contaminate the linens? Below shared some reasons for this problem. 1, A high-speed ironing line consists of a linens spreading machine, an ironing machine, and a folding machine, it's possible that excessive lubricant was added to a bearing on the fabric spreading machine, or that too much lubricant dripped from the cylinder onto the fabric tray, contaminating the linens. 2, It's also possible that excessive lubrication is applied to the chain on the side of the folding machine, causing excessive swinging and spilling oil onto the fabric tray, contaminating it, even if it's not centered. 3, If the oil stains appear in the middle of the linen, you might not realize that the long shaft on the fabric spreading machine head, where the spreading machine connects to the ironing machine, is composed of three sections in the middle. There are four bearings on both sides, if these bearings are damaged or worn, oil and metal shavings inside will fall into the fabric tray. Could check above points to find the reasons. If you've encountered this situation before and find it difficult to resolve, please feel free to contact us to discuss and find solutions. |
 |