| When the chest ironer working, the linen be spread out on the feeding table, on the ironing belt carries it forward, and via the roller ironer padding, feeding into the into the pre-heated, steam-filled chest, while the roller rotates, its own weight plus steam pressure forces the fabric against the polished chest surface. The resulting friction and relative motion iron the linen; guide tapes keep it aligned for the next roller or the outfeed opening. At the same time an exhaust fan continuously removes the steam generated inside the roller, so the fabric dries as fast as it is pressed. At the same time an exhaust fan continuously removes the steam generated inside the roller, so the fabric dries as fast as it is pressed. |
 |
| 1. Ironer felt / padding: The functions of ironer felts are moisture absorption, heat insulation, dust prevention, anti-static, and friction prevention. Different steam pressure, steam temperature, steam quality, linen type, and linen moisture content all affect felt consumption. The lifespan and quality of the felt also significantly impact the quality of linen ironing. 2. Waxing: The purpose of waxing is making the ironer chest has a smooth surface, reduce friction, and prevent linen wrinkling. Generally, when ironer working 4 hours should waxing through a wax cloth. High quality wax evaporates without residue, making the felt less susceptible to contamination, Hongkong Xinyun can offer this high quality wax. Low-quality wax has a low melting point and leaves a lot of residue, which can leave dirt after evaporation. The timing, temperature, and frequency of waxing are crucial. |
 |